|
|
Home > Swimming Pool Supply > Swimming Pool Chemical > Stain Mineral Control >
|
| |
SPARKLE CONQUEST
Swimming Pool Chemicals |
|
Sparkle Conquest is the last word in removing surface stains and clearing mineral discolored water in vinyl and masonry pools |
|
 |
|
|
|
Click on the Picture for Image
Gallery |
|
|
FEATURES : |
- Super Strength sequestering agent
- Prevents and removes mineral discoloration
- Removes stains without brushing
- Pools: 1qt per 20,000 gallons Maintenance - 1 oz per 5,000 gallons
- Spas: 1 oz per 250 gallons Maintenance - 1 oz per 500 gallons
- MSDS Info!
|
|
|
|
Item No |
Description |
Freight |
List Price |
Price |
Save |
|
|
|
|
|
|
| PRECUTIONARY STATMENTS CAUTION |
|
Causes eye irritation. Harmful if swallowed. Avoid contact with skin or eye. If product gets in eyes, immediately flush with clear, cool water and seek medical attention. If product gets on skin, flush with water and wash with glycerin. Consult medical personnel if irritation persists. If product is ingested, contact physician immediately.
|
|
This product is a concentrated sequestering agent for use in pools, spas, and hot tubs for the control of copper, iron, and manganese. This product also dissolves calcium scale and helps removes most stubborn stains which are found imbedded in white finishes and vinyl liners
|
|
Add this product directly to pool water while walking around perimeter at the rate of 1 quart per 20,000 gallons. In freshly filled pools where mineral presence is suspected, add product to the water several hours before adjusting pH or adding chlorine. This allows the product to sequest minerals before chemicals can cause them to discolor the water or stain the pool finish. When this product is added to mineral discolored pools, it will eliminate the unwanted color and should remove many stains that regularly occur in pools in their normal operation
|
|
Turn off the filtration system in the evening and allow the water to settle overnight. The next morning, vacuum any settled precipitate to waste. Depending upon mineral content, this procedure may have to be repeated each morning until pool floor is clean the next morning. Squestering occurs in a few hours. Stain removal will start to occur immediately but will take up to a week to penetrate deeply imbedded stain. Some stains require that the product be applied directly to them. This is not practical in cases where the pool cannot be drained, however, devices such as the Jandy stain Master can be used with this product although dilution of this product with water may be necessary due to its thickness.
|
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
