BLUE WAVE® HOT TUB SPA WATER BALANCE CHEMICALS

 pH BALANCE

KEEP YOUR pH BALANCED!
Save time and money by using pH Balance chemicals to keep pH and alkalinity levels stable in your hot tub spa water. Add pH Balance chemical to freshly filled hot tub water after the pH and alkalinity are initially balanced. This will help to prevent pH and alkalinity levels from bouncing around. Not recommended for areas with hard water.
Dosage: 1 qt. per 500 gallons

SPA UP

RAISES PH TO IDEAL LEVELS!

Balanced water chemistry is the first, most important step to clean, sparkling water. pH levels below 7.2 ppm can cause eye irritation, rapid use of chlorine/bromine, and corrosion. Use Spa Up chemical in appropriate dosages to raise the pH in your hot tub spa water to the ideal range of 7.2 to 7.6 ppm.

 SPA DOWN

LOWERS PH TO IDEAL LEVELS!

Balanced water chemistry is the first, most important step to clean, sparkling water. pH levels above 7.6 cause cloudy water and eye irritation; and can reduce chlorine/bromine's effectiveness. Use Spa Down chemical to lower the pH and alkalinity levels in your hot tub spa water to the ideal range of 7.2 to 7.6 ppm.

SPA ALKALINITY UP

RAISES ALKALINITY TO IDEAL LEVELS!

Balanced water chemistry is the first, mort important step to clean, sparkling hot tub water. Raising alkalinity to the "safe zone" of 80 to 150 ppm makes your pH easier to keep in line and makes your sanitizer work more effectively. Use Spa Alkalinity Up chemical to stop the eye irritation and corrosion that can result when your alkalinity drops below 80 ppm.

 

SPA CALCIUM HARDNESS INCREASER

RAISES HARDNESS TO IDEAL LEVELS! FOR AREAS WITH SOFT WATER!

Low calcium can cause corrosion of your spa's plumbing and heating, and stain your hot tub spa's surface. When the calcium level of your spa water drops below 200 ppm, just add Calcium Hardness Increaser chemicals as needed.