|
Spa Recipe
Ingredients
• Nature2 Purifier
• Non-chlorine oxidizer (potassium peroxymonosulfate)*
• Nature2 Spa Test Strips** or Test kits (pH,
total alkalinity)
• pH and total alkalinity adjusting chemicals
• Dichlor
|
When: |
What to do: |
|
Purifier Start Up |
Drain and refill your spa. Balance water
per dealer guidelines. Add 1 teaspoon of
dichlor to spa per 250 gallons (approx.
1000 litres). (Note: 1 teaspoon = 1/4
ounce = 7 grams.) |
|
Every Day |
Run spa according to recommendation
supplied to you by the manufacturer of
your spa |
|
Before Each Use |
Add 1 tablespoon of potassium
peroxymonosulfate (MPS) to spa per 250
gallons (approx. 1000 litres)
(Note: 1 tablespoon = 1 tablet = 3/4
ounce = 21 grams.) A convenient way to
insure proper MPS level is to use a
Nature2 Spa Test Strip. If
the Nature2 Spa Test Strip
indicates a low level of MPS, add 1
tablespoon of MPS to spa per 250 gallons
and retest. |
|
Once A Week |
Add 3 tablespoons of potassium
peroxymonosulfate to spa per 250 gallons
(approx. 1000 litres). Check and adjust
pH and total alkalinity. A convenient
way to check pH and total, alkalinity
levels is to use a Nature2
Spa Test Strip. |
|
Every 4 Months |
Drain and refill your spa.
Replace Nature2 purifier,
repeat purifier start-up.
|
|
As Needed |
If water looks hazy, shock treat with 1
teaspoon of dichlor per 250 gallons
(approx. 1000 litres) |
|
Important
The Nature2 Spa Purifier is not to be used
with products containing bromine, sodium bromide or
biguanides. If these products are being used, be sure
to drain and refill spa with fresh water.
Note:
• As an alternative to potassium monopersulfate, dichlor
may be substituted:
1 teaspoon dichlor = 3 tablespoons potassium
peroxymonosulfate.
• The use of an efficient ozone generator with Nature2
may reduce the need for supplemental chemical
treatments.
* Potassium peroxymonosulfate may cause a lowering of
the pH and total alkalinity of your spa water. Please
monitor pH and total alkalinity at least once per week
and adjust accordingly.
|