|
|
| SAFETY VACUUM RELEASE SYSTEM |
|
|
As low as $869.95 |
|
 |
|
|
|
STRATUM Safety Vacuum Release System When it comes to pool safety, multiple layers of protection are crucial. As an additional layer of protection, Hayward® introduces Stratum™ VRS (vacuum release system)—the next level in peace of mind. The Hayward Stratum VRS is the only SVRS to both vent the pump suction line to atmosphere and turn off the power to the pump motor.
Manufacturer : Hayward Pool Products
|
|
|
|
As low as $509.95 |
|
 |
|
|
|
VAC-ALERT Safety Vacuum Release System Vac-Alert provides an important layer or protection to suction entrapment with Vac-Alert VA-2000 safety vacuum release system. When a swimmer becomes stuck to a drain or suction outlet in a swimming pool, spa, wading pool, or hot tub, the force ofthe filtration system can be tremendous. This suction entrapment will hold the bather in its grip until either the vacuum is broken, or he or she drowns, defying the rescue efforts of onlookers.
Manufacturer : VacAlert LLC
|
|
|
|
As low as $1,059.95 |
|
 |
|
|
|
INTELLIFLO VS+SVRS Safety Vacuum Release System There’s simply no better way to add a Safety Vacuum Release System (SVRS) to your public pool or spa than with the new IntelliFlo® VS+SVRS pump. It helps prevent suction entrapment and also provides value that no other solution can.
Manufacturer : Pentair Pool Products
|
|
|
|
As low as $21.95 |
|
 |
|
|
|
VGB DRAIN COVER Safety Vacuum Release System For concrete or vinyl/fiberglass pools, Hayward industry approved suction outlets and covers are available in a wide range of styles, sizes and colors to satisfy any installation requirement. Whether you install frame and covers, for residential or commercial pools, or sump-type drains, Hayward suction outlets set the standard in quality and value.
Manufacturer : Hayward Pool Products
|
|
|
|
|
|
| Safety Vacuum Release Systems provide a layer of protection against certain entrapment risks. They react to changes in vacuum (main drains and other suction pressure sources). |
| The Virginia Graeme Baker Pool and Spa Safety Act was recently enacted into law. The Act, which will be administered by the U.S. Consumer Products Safety Commission (CPSC), imposes mandatory requirements for suction entrapment avoidance. |
| The deadline for commercial pool compliance is December 19, 2008. |
| The vacuum release systems provided by Amerimerc LLC can bring your commercial swimming pools into compliance. |
| Who should have an Safety Vacuum Release System (SVRS) installed? |
| By December 19,2008, all public pools and spas, including the following facilites, must be compliant with the Virginia Graeme Baker Pool and Spa Safety Act. |
- Hotels
- Apartment Complexes
- Municipal Pools
- Schools
- Recreation Centers
- Public Pools
- Country Clubs
- Swim Clubs
|
| Safety Should Always Come First |
| When is comes to pool safety, multiple layers of protection are crucial. That is one of the reasons why on December 19,2007, President George W. Bush signed the Virginia Graeme Baker Pool and Spa Safety Act of 2007. The act is intended to increase the safety of swimming pools and spas by motivating states to pass laws that incorporate layers of protection in order to help prevent drowning, drain entrapment and hair entanglements. |
| The Virginia Graeme Baker Pool and Spa Safety Act is named for the grandaughter of former Secretary of State James A. Baker, III. In 2002 at the age of seve, Graeme Baker died in a spa after the powerful suction of a drain entrapped her under water. Baker joined Nancy Baker, Graeme's mother, and Safe Kids USA in a three- Year advocacy campaign for this legislation |
|
|
|
|
|
|
