|
|
CANTILEVER LIFEGUARD CHAIR
Commercial Swimming Pool LifeGuard Chair |
The Cantilever lifeguard chair is a 6' tall lifeguard chair that allows your lifeguards to easily scan large pool areas. The Cantilever has an extended observation platform for improved observation and safety. This permanent unit requires minimal deck space. The seat swivels 360-degrees for uninhibited scanning.
The Cantilever lifeguard chair is made out of the best materials, including a high-quality steel base coated with a primer, and an acrylic footboard with our SureFoot tread. |
|
 |
|
|
|
Click on the Picture for Image
Gallery |
|
|
FEATURES : |
- Tall chair available in 6' height allows your lifeguard to easily scan larger areas.
- Permanent installation is ideal for limited space decks.
- HEIGHT: 6'
- SEAT: 360 degrees swivel seat - for multiple area scanning
- FOOTBOARD: 30" x 42" extra-large, Non-skid observation platform -- improved observation & safety
- LADDER TREADS: 8" x 20" welded construction with non-slip pads.
|
|
More Info |
|
|
|
|
|
Item No |
Description |
Freight |
List Price |
Price |
Save |
|
|
|
|
|
|
Support Column
- 5" schedule 40 pipe with 3/8" top and bottom plates. Flanges are gusseted to support pipe with a 1/4" plate. Four uni-weld steps 3/16" x 8" x 20" are welded to the support Column.
- Each step has a self-adhesive non-slip pad attached
Footboard
- 1 3/4" x 30" x 42" acrylic skin footboard with non-skid top surface
- The footboard is bolted between the top flange and the 1/4" plate seat assembly flange.
Seat Assembly
- The base column is 1.90" O.D. x .065" wall, electropolished type 304 stainless steel. At the lower end of the column is a stainless steel plate which serves as a mounting flange. The same tubing forms the umbrella holder affixed to the rear of the base column.
Handrails
- Two 1 5/8" O.D. x .049" wall, type 304 stainless steel polished and buffed tube extending the length of the column and bolting to pipe adapters which are welded to the column.
Pre-Set Base
- 5" schedule 40 carbon steel pipe welded to 3/8" plate flange. Plate has welded inserts to accept 5/8" securing bolt.
FiberGlass Seat W/Swivel
- Swivel provides 360 degrees rotation. |
| |
|
| |
|
| |
|
|
|
|
|
|
