|
Problem |
Solution |
| Baracuda G3™ stops
and starts |
Check
diaphragm for blockage or damage. Adjust worn diaphragm by loosening
cassette swivel, gently pushing down on inner pipe & retightening
cassette swivel. |
| Baracuda G3™ is
patterning |
Add return
diverters or divert return inlets downward. Lay hose in a straight line
in the sun to relax memory. Confirm proper hose length - add 1 to 2 hose
sections. |
| Baracuda G3™ isn't
covering the opposite end of the pool |
Add return
diverters or divert return inlets downward. Use flow to move cleaner to
opposite end. Move hose weight away from cleaner head slightly. In deep
pools add additional weight. |
| Baracuda G3™ stuck
at steps |
Utilize
return flow (see adjustments). Confirm proper hose length. Adjust flow
to cleaner. Adjust hose weight. |
| Baracuda G3™ stuck
under ladder |
Install
ladder guard (PN W24000) |
|
Baracuda G3™ flips over |
Contact tech
services for local warranty station. |
|
Baracuda G3™ won't climb walls |
Cleaner may
not climb walls of some vinyl pools. Use Pool Pulse™ and raise
flow. Confirm proper hose length. Adjust hose weight. |
|
Baracuda G3™ doesn't move |
Use Pool
Pulse™ to insure proper flow. Clean baskets and filter. Check
diaphragm for damage. Check hose sections for leaks by lifting each
section above water. |
|
Baracuda G3™ won't leave edge or rim of pool |
Use Pool
Pulse™ and lower flow. Utilize return flow to move cleaner.
Adjust hose weight. |
| Solar
blanket installation |
Coverage
will be limited due to blanket. |
