The Generic Replacement Cell is designed to replace T-Cell-15 or GLX-Cell-15 for pools up to 40,000 gallons. NO RECONFIGURATION IS NECESSARY.
Configuration of your controller may be required before using the chlorinator cell. Refer to the information below. Incorrect configuration will cause inaccurate salt readings,
improper operation and possible system shutdown.
CONFIGURATION is necessary with following models:
- AQR (Aqua Rite - all 2009 or later): Firmware version 1.5 or later
- AQR-PRO (Aqua Rite Pro)
- PL-P-4 (Pro Logic P4)
- PL-PS-x (Pro Logic PS)
- AQ-LOGIC-P-4 (Pro Logic P4)
- AQ-LOGIC-PS-x (Pro Logic PS)
NO CONFIGURATION is necessary with following models:
- AQ-Rite (Aqua Rite - all 2008 or earlier): Firmware version earlier than 1.5
- AQR-RITE-XL (Aqua Rite XL)
|
