Gladon Peel N’ Place Cove is an economical and profitable alterative to
sand and dirt coves. Selling Gladon Peel N’ Place cove will significantly increase
dealer profits. Customer satisfaction will also be increased and liner failures due
to cove washout will be eliminated. These valuable features make selling Gladon
Peel N’ Place cove easy and profitable.
Gladon Peel N’ Place cove is a 3 inch by 4 inch preformed cove made from high density (2.3 lbs/ft3), chemically neutral, flexible Polyethylene foam and is safe for
use with all pool liners. Lightweight and easy to handle, Gladon Peel N’ Place Cove
comes in 48 inch long sections that bend easily without breaking and are compatible
with virtually all makes of pools. The super tacky adhesive backing is specially
designed to adhere to pool walls. When the release paper is peeled off, the adhesive
holds the cove sections onto the pool wall until the liner is filled with water.
Gladon Peel N’ Place Cove is easy to install in any pool. Just peel off the release paper and place it into position on a clean, dry pool wall. Note: Ideal conditions may be difficult to achieve depending on weather and the amount of dust generated during ground preparation. Peel N’ Place Cove is sometimes preferred by installers doing liner replacements where sand and dirt has filled the bottom rail, making it difficult to use our Original Cove with a backing strip. The Gladon Peel N’ Place design is not a new concept. The adhesive backing feature was included as part of Gladon’s original patent. Peel N’ Place Cove is available in a colorful, lightweight and shippable floor display carton.
|
