S.R. SMITH

As low as $33.95

6 inch Bronze Game Anchor for use with various swimming pool Games. Drilled hole at the bottom allows for drainage. This model does not have wedges but does include 1/4-20 UNC ground screw. It accommodates 1.90inch OD round tubing and Anchor cap is included for a flush look. This anchor is recommended for swimming pool games.

As low as $176.95

The Flush Anchor Pair is sold as a pair to be used with the two piece anchor plate. The Anchors are 2.5" long and have 1" diameter at the top. It includes anchor bolts, decorative filler screws, bonding screws and washers. The Flush Anchor Pair is recommended for Varsity Cantilever statring platforms.

As low as $289.95

Got Salt? If so, then grab this new non-corrosive stand and composite spring set. Designed for new and retrofit applications, this set helps you say yes to salt and no to corrosion.

As low as $298.95

The #1 choice for use in salt chlorinator pools! Get the strength of traditional steel, fully encapsulated with our patent-pending, chemically-bonded polymeric coating.

As low as $379.95

The RockSolid Starting Platform Anchor is a single post anchor for swimming pool starting blocks. It accommodates 2.5" square tubing and the adjustable wedge assembly ensures continuous, even pressure to eliminate platform movement. The optional Safe-T-Cap utilizes the anchor's wedge bolt to tighten and secure in place. Recommended for single-post starting platforms such as Legacy, RecordQuest & Universal Starting blocks. Anchor cap is included.

As low as $416.95

The Dual Post Starting Platform Anchor accommodates 1.90" OD round tubing. It includes a 1/4-20 UNC grounding screw. Anchor caps come included and the Dual Post is recommended for dual-post starting platforms: Legacy standard II only.

As low as $440.95

The Salt Pool Friendly volleyball game includes two commercial grade, SealedSteel posts, a competition quality net, competitive water volleyball and needle. It's made from corrosion resistant materials and top of the line materials for extra durability.

As low as $474.95

Protect against the unexpected - with PoolSonix, the industry's only solar-powered, dual technology wireless pool alarm.

As low as $659.95

The RockSolid Dual Post Starting Platform Anchor accommodates 1.90" OD round tubing with adjustable wedge assembly which exerts even and continuous pressure on the platform to eliminate movement and increase stability and safety. Anchor caps come included and the Dual Post is recommended for pool starting blocks such as the Legacy II.

As low as $775.75

Our Salt pool friendly basketbll set is a commercial grade swimming pool basketball set that has a corrosion resistand ABS backboard with a dual post design. Made from the highest quality materials, our pool sports games are designe to stand the test of time and provide your family with years of entertainment.

As low as $1,649.95

The WetDek is a great complement to an existing pool, a unique add-on to a new pool construction, or a special stand-alone feature.

As low as $10.95

The A41657-0 is a Hinged Ladder Anchor recommended for residential swimming pool. It allows the raising and lowering of new and existing ladders. Installation requires 4" to be cut off of ladder.

As low as $11.95

The Xpand-N-Lok Rubber Bumper is molded from blue rubber to use with 1.90inch OD tubing with 0.049inch to 0.065inch wall thickness. It is recommended for use with swimming pool ladders to protect wall, tile or other surfaces.

As low as $20.95

Double Escutcheon Plate for residential and commercial swimming pool ring handrails.

As low as $21.95

The A42073-0 tread is a high impact (HIP) pool ladder tread made of the highest quality molded white plastic measuring 3inches wide by 18inches in length at the centerline. Recommended for residential swimming pool ladders.

As low as $25.95

The AS-100C is a 3inch deep Bronze anchor recommended for swimming pool hand rails. It accommodates 1.90inch OD tubing and includes wedge, bolt, and 1/4-20 UNC grounding screw.

As low as $28.95

The A42077-0 is a 20inch White, blow molded plastic pool ladder tread measuring 4inch wide and 18inch in length at the center line. It is recommended for residential swimming pool ladders.

As low as $28.95

The AS-200B is a 4 inch deep Bronze Anchor recommended for swimming pool hand rails. It accommodates 1.5inch OD tubing and includes bronze wedge, washer, bolt and 1/4-20 UNC grounding bolt.

As low as $31.95

The AS-200B is a 4 inch deep Bronze Anchor recommended for swimming pool hand rails. It accommodates 1.5inch OD tubing and includes bronze wedge, washer, bolt and 1/4-20 UNC grounding bolt.

As low as $31.95

Oblong chrome plated 4 inch long brass escutcheons for use with 1.90inch OD tubing. It is equipped with stainless steel set screws and recommend for the IAS-100 anchor.

As low as $32.95

The LTDF-106 is a heavy duty commercial grade swimming pool ladder tread. Its made of high-impact plastic measuring 4inches deep x 20inches wide with 18inch centerline mounting distance. It is available in 2,3,4,or 5 step kits and comes with hardware. Recommended for commercial swimming pool ladders.

As low as $34.75

Universal anchor that is 6 inch deep anchor which includes a 2 inch spacer to create 4 inch socket when required. Includes bronze wedge with stainless steel bolt and ground screw. Recommended for swimming pool rails and games.

As low as $37.95

Measuring 17.5inch x 7inch at outer edges of lip, this recessed step is made of injected molded plastic and has textured stepping surface for safety.

As low as $40.95

This is a polished stainless steel tread which serves as an original equipment tread option for most S.R.SMITH residential and commercial ladders. They are suitable for use in most geographic areas.

As low as $49.95

This 6 inch Bronze anchor is perfect for utilizing in your installationof swimming pool hand rails as well as for many swimming pool games. This anchor does not utilize any wedges.

As low as $76.95

Legacy Eschutcheons for use with Legacy and Legacy Long Reach single-post swimming pool starting platforms. 5.25" square made of 304 stainless steel and powder coated Silver Gray.

As low as $76.95

RecordQuest Eschutcheons for use with RecordQuest and RecordQuest Long Reach pool starting platforms. 5.25" squares made of 304 stainless steel and powder coated.

As low as $109.95

The IAS-100 is a 4" deep bronze anchor suitable for commercial application such as commercial rails and lifeguard stands. It accommodates 1.90" OD fixtures and includes bronze wedge, bolt and washer.

As low as $115.95

A 20inch Safety-Pool Step Retrofit Kit made of heavy duty molded plastic with textured stepping surface for safety. It is available in 2,3,4,or 5 step kits and includes treads, protective side skirts and mounting hardware (US thread). The residential ladders have 10inch spacing between the steps while the commercial ladders have 12inch.

As low as $185.65

Frontier III or Glas-Hide Boards in certain lengths on residential pools. There are no unusual climatic restrictions for this stand's use. (shown with Frontier III Board )

As low as $188.95

The Supreme 656/658 Stand consists of a molded acrylic outer body in Radiant White which has been reinforced and strengthened with fiberglass on the body's interior.

As low as $259.95

IAA-100 is a 4" Bronze Instituitional Anchor Assembly for 1.90" OD fixtures. The stainless steel plate extends below the base of the anchor socket for additional security and in comes with steel plate, neoprene gasket, flat washer, hex nut, anchor socket, keyhole pin, 1/2" x 6" bolt, tile stop, collar and escutcheon. There is even a hole in the bottom for drainage. The IAA-100 is recommended for commercial rails and lifeguard stands.

As low as $607.95

The Fibre-Dive Diving Board, with the flyte deck, has a durable acrylic outer body (skin), a non-slip, sanded tread and is pre-drilled with two holes

As low as $629.95

The frontier IV Commercial Diving Board is the ideal board for strong adults and athletes weighing up to 400 pounds. It is available in radiant white and 8' length only. The frontier IV Commercial Diving Board features a durable acrylic skin and a non-slip sanded tread over a solid laminated core. This board can be used on your UF-15-200 or 70-209-500.

As low as $1,326.57

The Cantilever lifeguard chair is made out of the best materials, including a high-quality steel base coated with a primer, and an acrylic footboard with our SureFoot tread.

As low as $1,413.95

The Legacy™II Dual Post Starting Blocks are designed for use on competitive pools. All tubing components are stainless steel and electro polished for corrosion resistance. The optional dual post anchor is also made of stainless steel. This platform can be ordered to fit almost any deck and water height variable.

As low as $1,680.95

Each Universal starting platform is custom engineered and built to be tailored to your facility according to the exact specifications you define. The Universal is the ideal choice for a training pools used by young or inexperienced swimmers

As low as $1,830.95

This new portable lifeguard chair has a unique observation platform design and umbrella support, ideal for use on commercial and competition pools, and various sporting sites where permanent installation is not desired.

As low as $1,853.95

Each Legacy starting platform is custom engineered and built to be tailored to your facility according to the exact specifications you define. The Legacy is the ideal choice for highly competitive pools with no unusual requirements.

As low as $1,946.95

Each Legacy starting platform is custom engineered and built to be tailored to your facility according to the exact specifications you define. The Legacy Side Mount is the ideal choice for highly competitive pools where the starting platforms are on narrow bulkheads.

As low as $2,557.95

The RecordQuest starting platform features optional strobe lights which work with most major timing systems. The tapered footboard and step give this elite platform a polished look, and will complement any facility.

As low as $3,086.95

Legacy™ Long Reach Starting Blocks are designed for use on competitive pools. The frame is stainless steel and is powder coated for corrosion resistance.

As low as $3,199.95

The new Legacy™II Side Mount sets a new standard for competitive starting blocks. With a larger platform, powder-coated frame and customizable platform top, this platform will beautify your facility and improve swimmer performance.

As low as $3,801.95

RecordQuest™ Long Reach Starting Blocks are designed for use on competitive pools. This platform can be ordered to fit almost any deck and water height variable.

As low as $8.95

This is a molded rubber bumper suitable for use in protecting finished and tile wall faces, vinyl liners and fiberglass surfaces on residential and commercial installations in most geographic areas.

As low as $13.95

This is a round polished stainless steel escutcheon plate and is suitable for use in conjunction with new products as well as serving as a replacement item. They are suitable for use in most geographic areas.

As low as $14.95

The S.R.Smith, Snap-Tite two-piece escutcheon is made of high-density cycolac. This unique escutcheon is intended for use with 1.90inch O.D.Tubing. The 5.00inch diameter of the plate covers most mounting anchors/points.

As low as $15.95

Escutcheon Plate EP100F. This is a round polished stainless steel escutcheon plate suitable for use in conjunction with new products as well as serving as a replacement item. They are suitable for use in most geographic areas.

As low as $15.95

Escutcheon Plate EP100F. This is a round polished stainless steel escutcheon plate suitable for use in conjunction with new products as well as serving as a replacement item. They are suitable for use in most geographic areas.

As low as $16.95

This is an oblong polished stainless steel escutcheon plate and is suitable for use in conjunction with new products as well as serving as a replacement item. They are suitable for use in most geographic areas.

As low as $16.95

This is a white, injection molded plastic tread which serves as an original equipment tread option for most S.R.SMITH pool ladders. They are suitable for use in most residential swimming pools.

As low as $28.95

The LTDF-103 is made from 304 stainless steel polished Elite™ Tread. Strategic bends of the heavy-duty stainless steel provide the tread's unmatched strength.

As low as $72.95

The LTDF-103 is made from 304 stainless steel polished Elite™ Tread. Strategic bends of the heavy-duty stainless steel provide the tread's unmatched strength.

As low as $95.95

Repair minor damage to your diving board tread. Includes sandpaper, masking tape and gel coat.

As low as $130.95

The U-Style Diving Frames are designed for moderate to heavy-duty use with a variety of diving boards on commercial pool. The frames are constructed from 1.90 inch O.D. x .065 (48.3mm x 1.65) 304 stainless steel.

As low as $189.95

Handrails are made of 1.90inch O.D. x 0.065inch wall, 304 Stainless steel tube with polished and buffed finish. All bends are 6inch radius. Custom dimension handrails are available on a special order basis.

As low as $189.95

S.R. Smith's Economy Ladder is made from high-quality stainless steel and has white, plastic treads (LTDF-101). All bends are 6" radius to keep the ladder closer to the pool wall. S.R. Smith ladders made to stand the test of time!

As low as $200.95

S.R. Smith's Economy Ladder is made from high-quality stainless steel and has white, plastic treads (LTDF-101). All bends are 6" radius to keep the ladder closer to the pool wall. S.R. Smith ladders made to stand the test of time!

As low as $206.95

The Body of each stanchion is made of polished 1.9" O.D. 304 stainless steel with a wall thickness of 0.065". They have an overall length (excluding eyebolts) of 40". They have a height above the (recommended) anchor of approximately 36".

As low as $224.95

The Frontier II Spring is intended for light to moderate duty use with only the Frontier II Boards on residential pools. There are no unusual climatic restrictions for this stand's use

As low as $232.95

The Commercial Exercise, Training and Therapeutic (ETT) Bars with and without flanges are of polished, 1.9" O.D., 304 stainless steel with a wall thickness of 0.065". The ETT extends [on center] a distance of approximately 4" beyond the flange mounting post.

As low as $233.95

Commercial Ring Handrails are made of polished, 15/8" O.D., 304 stainless steel with a wall thickness of 0.065". The front and rear legs of each handrail return to mount into a single special anchor socket on either side.

As low as $263.95

1.90inch O.D. and available in 0.065inch, 0.109inch, and 0.145inch wall 304 stainless steel tube with a polished and buffed finish. 316L stainless steel available upon request.

As low as $287.95

1.90inch O.D. and available in 0.065inch, 0.109inch, and 0.145inch wall 304 stainless steel tube with a polished and buffed finish. 316L stainless steel available upon request.

As low as $296.95

Ladder frames are made of 1.9" O.D. and available in 0.065", 0.109", and 0.145" wall type 304 stainless steel tube with polished and buffed finish. All bends are 4" radius to provide a closer fit between pool wall and ladders.

As low as $304.95

The sleek appearance of S.R. Smith's Flyte Deck dive stand is perfect for your diving pool. The Flyte Deck stand comes in three sizes to accommodate 6foot, 8foot or 10foot length boards, allowing you to find the proper size for your pool. Durable, scratch resistant acrylic ensures a long life for your board and stand combination. Pair the Flyte Deck stand with our popular Fibre-Dive board, or upgrade to a Frontier III board.

As low as $306.95

With proper anchoring, the Deck Mounted Commercial Stair Rail is suitable for use on stairs and slopes on poured concrete, shotcrete, fiberglass, and vinyl commercial pools and spas as well as the other applications in most geographic areas.

As low as $309.95

Ladder frames are made of 1.90inch O.D. x .049inch wall, 304 stainless steel tub with mirror finish. All bends are 6inch radius. Frames extend from the pool wall 6 1/2inch on center.

As low as $332.95

Diving Tower parts and hardware like anchors, fulcrum cover, tie downs, ladder assembly, and more.

As low as $332.95

The Fibre-Dive Diving Board has a durable acrylic outer body (skin), a non-slip, sanded tread and is pre-drilled with two holes

As low as $355.95

Depending on the model chosen, these stanchions are either intended to be (1) linked together to form flexible and changeable line and barrier markings at amusement parks, entertainment centers, swimming pools, water features, theaters and other commercial applications where orderly line markings or barrier markings are required but where fencing is inappropriate or unsafe, or (2) used as banner stanchions for a variety of commercial, municipal, and social facilities.

As low as $380.95

The Camelback ladder is made from long lasting stainless steel or can be powder coated in one of our designer colors for added protection. Choose an ultra durable plastic, or stainless steel tread. Rubber bumpers are fitted to the ends to protect a vinyl liner where the ladder meets the side of the pool.

As low as $399.95

Spike it in the water with this water game made for the volleyball enthusiast.

As low as $419.95

Our special Snap-Lok ladder frames are made of 1.90inch O.D. x .049inch wall, 304 stainless steel tube with mirror finish. All bends are 6inch radius. Frames extend from the pool wall 6 1/2inch on center.

As low as $424.95

Our special Snap-Lok ladder frames are made of 1.90inch O.D. x .049inch wall, 304 stainless steel tube with mirror finish. All bends are 6inch radius. Frames extend from the pool wall 6 1/2inch on center.

As low as $467.95

Ladder Frames are made of 1.90in O.D. x 0.065in wall 304 stainless steel tube with a polished and buffed finish. All bends are 6in radius. Ladder frames shall extend from pool wall 6 1/2in.

As low as $469.35

Ladder frames are made of 1.90inch O.D. x .049inch wall, 304 stainless steel tube with mirror finish. All bends are 4inch radius. Frames extend from the pool wall 4 1/2inch.

As low as $479.95

The Swim N' Spike™ Volleyball is designed for use on in-ground pools in shallow water areas. The standard games will fit pools with a width of not less than 30 feet and not more than 56 feet depending upon model ordered. Special order games are available for pools not fitting in this width range.

As low as $554.95

The Frontier II Swimming Pool Diving Board is intended for light to moderate duty use on residential pools. There are no unusual climatic restrictions for this board's use.

As low as $647.95

Pretzel Bend Handrail design allows the anchors to be placed laterally taking up a minimum amount of deck space. With proper anchoring, the Pretzel bend handrail is suitable for use on poured concrete, shotcrete, and fiberglass commercial pools and spas as well as for other applications in most geographic areas.

As low as $678.95

The Pacific Pretzel Bend Handrail design allows the anchors to be placed laterally taking up a minimum amount of deck space. With proper anchoring, the Pacific Pretzel bend Handrail is suitable for use on poured concrete, shotcrete, and fiber glass commercial pools and spas as well as for other applications in most geographic areas.

As low as $707.95

The Swim N' Dunk™ Basketball is designed for use on in-ground pools in shallow water areas. The Swim N' Dunk™ Basketball is constructed of two high quality 1.90" diameter x 0.065 wall stainless steel uprights, with a competition quality acrylic backboard and regulation rim. The unit comes standard with a water basketball and needle.

As low as $739.95

The Frontier III Commercial Diving Board has a durable acrylic skin with a non-slip sanded tread. It is available in 10', 12', 14', and 16' lengths. All lengths of the Frontier III Commercial Diving Board feature a hand-laid fiberglass and resin roving over a solid laminated core runner acting as the board's skeletal frame.

As low as $782.95

This is tall height, long reach, special application ladder for both commercial and residential uses and is available with 3, 4, 5, or 6 treads. With proper anchor sockets, they are suitable for moderated to heavy-duty use in most geographic areas on both commercial and residential poured concrete and shotcrete, pools and spas where a long reach cantilevered ladder with handrails is desired

As low as $789.95

The Frontier III Board is intended for moderate to heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use. (shown with 606/608 Cantilever Stand)

As low as $799.95

The Frontier III Board is intended for moderate to heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use. (shown with 606/608 Cantilever Stand)

As low as $851.95

The 2/3-Meter Deck Level Stand For Commercial Swimming Pool Diving Boards measures 0.66 meters [26inch] from the top of the properly installed board to water surface and is designed for moderate to heavy-duty use on commercial pools.

As low as $869.95

The Glas-Hide Board is intended for heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use. (shown with 658 Supreme Stand)

As low as $889.95

The Glas-Hide Board is intended for heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use. (shown with 658 Supreme Stand)

As low as $913.95

The Swim Club Board is the ideal mid-range board for commercial pools. The are available in 10', 12', 14', and 16' lengths. They have a durable acrylic skin with a non-slip sanded tread.

As low as $933.95

The Steel Meter Steel Diving Stands are designed for moderate to heavy-duty use with a variety of diving boards on commercial pools.

As low as $1,194.95

The 18" and 30" Low Profile Starting Platforms are designed for use on competitive pools and are intended for new swimmers, or experienced swimmers when a lower platform is needed. All tubing components are 316L polished, stainless steel. The included anchors allow for quick removal of platform.

As low as $1,280.95

Olympian™ Aluminum Commercial Diving Board is available for commercial and residential use in 8', 10', 12' lengths and for commercial use in 14' and 16'. This Heavy duty board features an epoxy and welded beam extrusion construction with welded ends, the Olympian™ Aluminum Commercial Diving Board provides exceptional durability.

As low as $1,545.95

The institutional Lifeguard Chair is a tall lifeguard chair with an extended observation platform and umbrella support, intended for semi-permanent installation on relatively shallow anchor sockets. It may be ideal for use as a judging and observation chair on competition pools

As low as $1,559.95

The 1 Meter Econoline Diving Stand measures 1 meter from the top of a properly installed board to water surface and is designed for moderate to heavy-duty use on commercial pools.

As low as $1,986.95

These low profile lifeguard chairs are both versatile and easily accessible. They are aesthetically pleasing and designed for use where permanent installation is not desired. These chairs come standard with wheels for portability.

As low as $2,070.95

Available with 6' or 8' nominal chair height, the Vista Moveable Lifeguard Chairs are ideal for use on university, high school and public pools where permanent installation is not desired.

As low as $2,199.95

The newest addition to our rotomolded family of slides, means there is a slide for every pool! Standing 88inch tall, and offering a high-volume GrandRapids water delivery system, this slide provides thrilling rides that everyone will love! Available in Sandstone and Gray Granite designer colors to match the latest in backyard decor.

As low as $2,433.95

The Portable lifeguard Chair has an extended observation platform and umbrella support, for use on commercial and competition pools, and various sporting sites where permanent installation is not desired. 6' nominal chair height.

As low as $2,504.95

The Eureka is the ultimate acrylic board ideal for heavy-duty use on commercial pools. It is available in both 14' and 16' lengths. The Eureka Boards feature a durable acrylic skin and a non-slip sanded tread. All eureka models feature hand-laid fiberglass and resin roving over a solid laminated core acting as the board's skeletal frame.

As low as $2,669.95

The Guardian™ Lifeguard Chair is equipped for comfort with form fitting fiberglass seat, and extended observation platform, umbrella support, and a rescue tube holder. It is intended for permanent installation.

As low as $2,742.95

Available with 6' or 8' nominal chair height, the Vista Moveable Lifeguard Chairs are ideal for use on university, high school and public pools where permanent installation is not desired.

As low as $2,799.95

This slide was designed for maximum fun and safety with an enclosed ladder and molded handrails. The Turbo Twister Slide fully conforms to the Consumer Product Safety Commission Safety Standard for Swimming Pool Slides

As low as $6,499.00

The ADA-compliant PAL is a completely portable aquatic lift, requiring no mounting to the pool deck. It contains over 700 pounds of counter weight to support a lifting capacity of 300 pounds. Since its introduction in 1997, the PAL (Portable Aquatic Lift) has become the industry standard for portable swimming pool access. The completely portable PAL is the perfect for any aquatic facility.

As low as $8,518.95

Designed for heavy-duty use on commercial pools, Deluxe 2 and 3 Meter Diving Towers use all steel component constructed from carbon steel and are primed ready for paint topcoat

As low as $12,416.95

Use this slide for high-end residential or crossover to commercial applications. The Vortex Slide is a close Flume. Choose a ladder or staircase designs to customize to fit your application.

As low as $322.99

The Frontier II Swimming Pool Diving Board is intended for light to moderate duty use on residential pools. There are no unusual climatic restrictions for this board's use.

As low as $357.95

Take fun competition to a new level with our Swim n' Dunk Basketball games! These games were created to give you hours of enjoyment from your pool wiht family and friends

As low as $4,999.00

The ADA-compliant Splash! Lift is a semi-portable aquatic lift, that requires a square deck anchor. It supports a lifting capacity of 400 pounds (Extended Reach model is 300 pounds). The Splash! is perfect for facilities seeking to provide user-friendly access to their swimming pool.

As low as $92.95

The ADA-compliant Splash! Lift is a semi-portable aquatic lift, that requires a square deck anchor. It supports a lifting capacity of 400 pounds (Extended Reach model is 300 pounds). The Splash! is perfect for facilities seeking to provide user-friendly access to their swimming pool.

As low as $309.95

The Frontier III Board is intended for moderate to heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use.

As low as $1,058.95

Rogue Pool Slide - SR Smith Rogue Grand Rapids Swimming Pool Slide

As low as $3,199.00

The multiLift™ is SR Smith's most versatile pool lift yet, with the option provides flexibility to remove the lift for poolside events or mounting means less to think about deck. The multiLift™ is also the first pool lift to come standard with our new LiftOperator™ Intelligent Control System. As with all S.R. Smith pool lifts, the multiLift is third party verified to be ADA-Compliant.

As low as $3,999.00

The ADA-compliant aXs is a semi-portable aquatic lift, requiring a stainless steel anchor. It supports a lifting capacity of 300 pounds. The aXs is perfect for residential and small hotel use. This unit is powered by a rechargeable battery and can be operated by the user via a waterproof hand control.

As low as $424.95

The Glas-Hide Board is intended for heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use.

As low as $849.95

The Cyclone™ Slide is the smallest size but is packed with big fun for kids! Designed to fit on virtually any inground pool, this slide has a compact footprint that fits on limited deck spaces. Put the Cyclone™ Slide on your pool and let the fun begin!

As low as $1,940.00

The Handy Lift manual hydraulic lifter is portable and removes from its anchor socket easily without tools. The Handy Lift is ideal for pools that require a lift in multiple locations. The frame is made completely of stainless steel to reduce corrosion, and the heavy-duty mesh sling is included.

As low as $925.95

The board for athletes or aduts weighing up to 400 lbs. This board has 11" center to center holes and will not work on Standard U-Style or Steel Meter stands. It will work with our "New" U-Style and Steel Meter stands especially designed for this board.

As low as $1,949.95

S.R. Smith's AquaBlast™ slide was created to fit virtually any size inground swimming pool. The 46inch low-profile, compact design works well with limited deck spaces. With the high-volume GrandRapids™ water delivery system, this slide is the perfect way to add fun to your pool!.

As low as $1,499.95

S.R. Smith's RocketRide™ slide was created to fit virtually any size inground swimming pool. The 4 ft 6 inch low-profile, compact design works well with limited deck spaces.

As low as $418.95

Safe, exciting diving is the result of using our newest jump board from S.R.Smith, the Baja. The Baja, designed for residential in-ground pools, is available in both 6' and 8' models to best fit most diving pools.

As low as $1,169.95

S.R. Smith's HipHop is the Hip way to Hop into your pool! The attractive board and base add fun to your pool, without distracting from your poolscape. The board and base are made from a durable composite material, ensuring a long life for your board and stand combination.

As low as $6,349.95

The BigRide adds Big Fun to your pool, with a super long, extra deep runway and a high volume water delivery system for the ride of your life! Available in four designer colors, and in right and left curves to suit any pool configuration.

As low as $520.99

The LiftOperator Intelligent Control is the most technologically advanced pool lift control on the market.

As low as $1,133.95

Show your style poolside! Add an interesting focal point to your pool, and direct your family and friends to where it is safe to dive. Available in two natural colors to complement your backyard poolscape.

As low as $2,160.00

MAC Swimming Pool Wheel Chair has beautifully powder coated stainless steel frame to resist corrosion, rotomolded rigid plastic seat.

As low as $21.95

A complete line of commercial and residential swimming pool lift accessories such as bateries, vests, covers, actuators, controls, seats and caddies. All accessories offered by S.R. Smith for their pool lifts.

As low as $32.95

The S.R.SMITH U-Frame Fullcrum Covers are of heavy-duty while extruded rubber, are 20inches (508mm) in length and are formed to accept 1.90inch (48.3mm) Outer Diameter tubing.

As low as $49.95

Bolt kits from Diving Boards and Stands accessories. Include the Resi bolt kit, 0.5 inch by 4.5 inch SS, or FRTII s/b mounting 3 bolt kit

As low as $153.95

The machined aluminum Anchor Flange Assembly (75-209-5000) provide a suitable mounting point when surface mounting light to moderate duty residential and light duty commercial equipment whose outer diameter tubing is 1.90 inches (48.3).

As low as $173.95

The Plastic Anchor Flange Assembly (05-623) provides a suitable mounting point when surface mounting light duty residential equipment whose outer diameter tubing is 1.9inch (48.3mm). The base is symmetrically predrilled to accept four mounting bolts.

As low as $188.95

The S.R Smith Epoxy Kits are designed to repair or install diving board anchors on existing decks.

As low as $201.95

Custom-sewn cover fits snugly over slide to protect it during the winter months. Made of tough woven polyethylene with sewn edges and brass grommets. It comes with nylon tie-down rope to ensure a tight fit. Takes just minutes to install.