|
|
|
FRONTIER III DIVING BOARD
Residential Diving Boards |
The Frontier III Board is intended for moderate to heavy-duty use on residential pools. There are no unusual climatic restrictions for this board's use. (shown with 606/608 Cantilever Stand).
With the exception of the drilling pattern and in (nominal) lengths of
6-feet (1.83m), 8-feet (12.44m) and 10-feet (3.05m), the Frontier III Board is identical in construction to the Frontier II Board. In the 6, 8 and 10-foot sizes, the Frontier III has a durable acrylic outer body (skin) and a non-slip, sanded tread. The Frontier III is also available in a (nominal) length of 12-feet (3.66m) but featuring a gel-kote rather than acrylic surface. All lengths of the Frontier III Board feature hand-laid fiberglass and resin roving over a solid laminated wood runner acting as the board's skeletal frame. The Frontier III Board is available either pre-drilled with two holes for ease in installation or without pre-drilled holes (add NH to the part number to specify) to allow mounting on a variety of existing stands. Note: there is no warranty for boards provided without pre-drilled holes or mounting hardware. |
|
 |
|
|
|
Click on the Picture for Image
Gallery |
|
|
|
|
|
|
 Email
this Page |
| NOTES:NOTES : FOR RESIDENTIAL USE ONLY. FOR COMMERCIAL USE SEE COMMERCIAL FRONTIER III DIVING BOARD |
| |
|
 |
| |
|
|
|
Related Products
 |
| |
|
| |
|
| |
|
|
|
|
|
|
|
