|
|
|
INTELLIFLO VS+SVRS
SAFETY VACUUM RELEASE SYSTEM |
| There’s simply no better way to add a Safety Vacuum Release System (SVRS) to your public pool or spa than with the new IntelliFlo® VS+SVRS pump. It helps prevent suction entrapment and also provides value that no other solution can. |
| While other safety solutions represent an added cost, IntelliFlo is an investment that may potentially save thousands of dollars in energy costs over its long life. |
|
|
 |
|
|
|
Click on the Picture for Image
Gallery |
|
|
FEATURES : |
- Replaces 3HP or smaller pumps
- Meets ASME A112.19.17 standards for anti-body entrapment protection
- Onboard intelligence senses blockage with auto shutdown
- Exclusive breakthrough motor technology provides energy savings while being safety compliant
- 8 settable, changeable speeds ranging from 1100 to 3450 RPMs
- NSF certified and UL and ETL Listed
|
|
|
|
Item No |
Description |
Freight |
List Price |
Price |
Save |
|
|
|
|
|
|
| Reliable anti-body
entrapment protection for your peace of mind |
| With its built-in controller, proprietary software, and backup
safety features, IntelliFlo VS+SVRS pump provides the protection your
pool or spa requires with a virtually fail-safe, tamper-proof solution. |
- Meets ASME A112.19.17 standards, thus complying with
the Virginia Graeme Baker Pool Safety Act SVRS Requirements.
- Includes a built-in controller with proprietary software that detects blockage
and automatically shuts itself down within seconds
- No SVRS calibration required: the blockage detection/shut down function
is pre-programmed into the software. Once the IntelliFlo VS+SVRS pump is installed,
the SVRS function works without measurements, calculations and sensitivity settings
required with other devices.
- Unlike other devices, IntelliFlo VS+SVRS pump’s SVRS protection cannot be disabled.
- If for any reason IntelliFlo VS+SVRS pump’s controller becomes inoperable,
the pump will not run, providing an added layer of safety.
- Safety lock-out feature (password protected) prevents settings from being changed by unauthorized personnel.
|
| Two key technology innovations drive significant energy savings |
IntelliFlo VS+SVRS pump includes exclusive, breakthrough motor technology and controllable, variable-speed technology that combine
to drive down energy use and cost. And the savings potential may be measured in thousands of dollars over its long life.
First, the IntelliFloVS+SVRS pump uses an exclusive permanent magnet motor—like those used in hybrid cars—in place of a traditional
induction motor. Permanent magnet motors are fundamentally more energy efficient.
Second, the IntelliFlo VS+SVRS pump includes a variable speed capability, along with digital controls and proprietary
software that allow custom programming of optimum pump speeds for specific tasks—filtering, heating, cleaning, spa jets, etc.
Traditional pumps’ one pre-set speed are almost always greater than that needed to meet the health department turnover requirements.
With a variable speed pump, the optimum speed will almost always be lower than the pre-set, unchangeable speeds of older pumps. IntelliFlo VS+SVRS pump’s eight settable, changeable speeds (ranging from 1100 to 3450 RPMs) mean you can program the exact flow requirements for each task, assuring the lowest energy use possible…adding to your savings. Plus with IntelliFlo VS+SVRS pump, you may be able to further reduce energy costs by reducing flow rates during non-pool use hours while maintaining 24 hour-a-day filtration…at a much lower cost. Check with your local health department for requirements in your area.
|
| Here's just one comparative example: |
| Pump |
Annual Kilowatts Use @ 24 hr/day Run
Time |
Annual Electric Cost @ .15 Kwh |
Savings Difference* |
|
2 HP |
19,272 |
$2,891 |
|
|
IntelliFlo VS+VRS |
9,654 |
$1,448 |
$1,443 or 50% |
| *Actual savings can vary. Example reflects saving for an average
30,000 gallon commercial pool operating 24 hours per day at flow rate
sufficient to perform a minimum 6 hour turnover |
| Engineered for exceptionally long life |
| IntelliFlo VS+SVRS pump's permanent magnet motor produces far less
heat and vibration than traditional induction motors. This not only
results in less stress and wear on pump components, but on
otherequipment, too. Exclusive load-sensign software provides nearly
instant priming which saves energy and reduces wear and tear on the
pump. Plus, built-in diagnostics protect the IntelliFlo pump from the
most common causes of premature pump failue overheating, freezing, and
voltage irregularities. The result is you can expect dramatically longer
life and an even greater return on your investment. |
| Other valuable features |
IntelliFlo VS+SVRS pump anticipates and solves other pool operating
challenges:
- Easy to program and monitor: simple push-button controls and
clear LCD readouts show status and text alerts to make operation a
cinch.
- Ability to set minimum and maximum speeds: IntelliFlo will only
operate within the ranges you set to help assure safe operation and
long equipment life.
- Built-in clock and timer: Obsoletes and need for an added time
clock or expensive controller.
|
| The Only SVRS compliance solution that
reduces operating costs |
| Don't just comply with the Virginia Graeme Baker Safety Act, upgrade
your pool with the intelligent IntelliFlo VS+SVRS pump. This pump not
only meets safety requirements, it provides longer, trouble-free
service, and may save thousands of dollars in utility costs over its
long life. |
Pump Body
Volute type back pull out design for ease of working on
impleller, diffuser and seal
- PortSize
- Inlet (Suction): 2 inch - 11 NPT
- Oulet (Discharge: 2 inch - 11 NPT
- Material
- Glass Filled Polypropylene Thermoplastic with threaded brass inserts for maximum strenght.
- 1/4 inch NPT drain plug of thermoplastic thumbscrew (no tool required) design on the strainer for winterizing.
- Impeller
- Glass Filled Noryl enclosed design for corrosion prevention and maximum flow efficiency
- Threaded Brass Insert for maximum strength
- Diffuser
- Glass Filled Polypropylene Thermoplastic material with broze impeller wear ring.
- Patented FunnelFlo design for maximum efficiency.
- Seal Plate
- Glass Filled Thermoplastic material with threaded brass inserts for strength.
- Machanical Seal
- Type 6A mechanical seal
- Gaskets
- Buna Rubber compression resistant
- Bolts, Nuts, and Washers
- Stainless Steel
- Corrosion Prevention
- All thermoplastic pump for maximum hydraulic performance, noise reduction, and corrosion prevention.
|
|
Hair and Lint Strainer
- Basket
- Polypropylene Thermoplastic Basket Colored White for easy debris removal
- 7.75 inch tall basket with large open area exceeding the requirements of NSF for maximum debris removal and efficiency
- Lid
- Clear "see thru" Polycarbonate Thermoplastic Lid for easy view into the basket area.
- Lid Locking Ring
- Glass Filled Thermoplastic.
- Cam and Ramp Design allows for quick and easy access to the basket.
Motor
- Frame and Type
- NEMA 56 Frame Square Flange totally enclosed fan cooled.
- Permanent magnet synchronous motor (PMSM)
- Shaft
- DS 8018 Stainless Steel Construction
- Thermal Overload Protection
- Thermal Overload Protection provided by the integral motor control
- Bearings
- Lubricated, double sealed, stainless steel, single row ball bearings.
Electrical
- 230 Volts, 1 Phase, 16 amps maximum 50 or 60 Hertz
- Circuit Breaker Required: 20 amp, 2 pole, 230 Volts
Pump Maximum Thermal Limits
- Ambient Air Temperature: 130 Degrees F
- Liquid Temperature: 104 Degrees F
|
|
 |
 |
 |
 |
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
