Filbur FC-2800 Filter Cartridge for Swimming Pool and Spa Filters.
877.891.7665

 

 

 

 
 
HomePool Supply > Pool Spa Filter Cartridge > Filbur FC-2800 Filter Cartridge

Back to Filbur Filter Cartridge Lists

Replaces Filbur FC-2800 Filter Cartridge

   
Item No Description Freight List Price Price Save  
FC2800 6-5/8In X 15-1/2 W/2In Thd Sae Thd FREE $61.43 $40.95 $20.48
   
       

Description:

 6-5/8In X 15-1/2 W/2In Thd Sae Thd

OEM:

 6540-476

Length:

 15 1/2

Unicel No.:

 6CH-960

Diameter:

 6 5/8

Pleatco No.:

 PJW60TL-2A

Top:

 Handle

Filbur No.:

 FC-2800

Bottom:

 2" SAE

Harmsco No.:

 Unknown
 
The above filter works with the following Manufacture's Filters / Hot Tubs
Jacuzzi Premium

FREE SHIPPING -------------- BUY TWO OR MORE GET 5% OFF

Pool Filter Cartridge
All of our swimming pool and spa filter cartridges use genuine Reemayâ„¢ spunbound polyester media. End caps for the Pool and Spa cartridges are made from a durable polyurethane material and are available in a variety of configurations. Center cores of our cartridges are comprised of punched PVC pipe for consistent flow. All cartridges include the features listed below.
  • Sharp pleat folds.
  • Over 400 different models.
  • Shrink wrapped and labeled.
  • Thermally bonded end caps for long life and durability.
  • Custom cartridge design is available.

FREE SHIPPING -------------- BUY TWO OR MORE GET 5% OFF

 

 
How to measure a cartridge
  1. Measure the outside diameter of the filter cartridge in inches.
  2. Measure the length of the filter cartridge from end cap to end cap. Do not include things like handles or threaded bottoms in the measurement.
  3. Identify the end cap configuration. Is it threaded with a handle, or open on both sides? Look at the pictures below to help you better identify the end cap. If it is open measure the inner diameter of the hole.
  4. To better identify the cartridge, count the number of pleats. This allows us to know the square footage of the cartridge in question.
Open Top/Bottom Closed Top Closed Top w/String
Handle
Open Top/Bottom
w/Gasket
Castle Top Step Semi-Circular
Handle
Injection Molded Knob Handle
       
Injection Molded Cone Adaptor Open Bottom w/Slots Open Bottom w/Male Slip Fitting Open Bottom w/Male
Threaded Fitting
     

SAE Thread

How to clean your cartridge
  • When the pressure gauge on your filter tank reaches 8 p.s.i. above the pressure recorded when a new cartridge is installed, or when there is a noticeable decrease in the pressure coming from your return jets, it is time to clean your cartridge.
  • Remove the cartridge from the filter canister and dislodge loose debris by directing a stream of water from a garden hose between each pleat. Do not use a high-pressure car wash wand or a stiff brush to clean your cartridge. These abrasive methods may damage the filter media.
  • Soak the cartridge in a commercially prepared cartridge cleaner to remove oils or other organics. If stubborn stains persist, soak the cartridge overnight in a solution of one-quart household bleach to five gallons of water.
  • Rinse the cartridge thoroughly with clean fresh water and return it to the filter tank. Secure the tank lid and restart your filtration system per manufacturer's instructions.
  • Always follow your filter equipment manufacturer's instructions when removing or reinstalling your filter cartridge. Always exercise extreme care when handling bleach or any other chemical. We recommend against acid washing your filter cartridges.
 

 

 

 

 

 

 
 

HOME | CHECKOUT | VIEW CART | WEB MASTER | SITE MAP | PRODUCTS | AFFILIATE PROGRAM
FEEDBACK | REFUND POLICY | FREE SHIPPING INFO | CONTACT US | CUSTOMER SERVICE
©Copyright 2013-2014 USA Pool Supplies LLC All rights reserved.
Privacy Policy & Legal Notice.
Amerimerc    

Unicel Pool Spa Filter Cartridge - Swimming Pool Spa Water Replacement Filters Cartridges